 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converter TES 3 Series Features Surface Mount DIL-Package 15 Standard Models Regulated Output Voltage Wide 2 :1 Input Range High Efficiency up to 83 % I/O-Isolation 1500 VDC Operating Temperature -40 to +75C Short Circuit Protection High Accuracy of Pin Co-Planarity Reflow Soldering to CECC00 802, Issue 2 2 Year Product Warranty 3 Watt The TES 3 converter series is intended for all applications where PCB's are assembled on an automated SMD production line. The smaller size DIL-package and the light weight allows easy handling by pick-and-place machines. With their small footprint these converters are the state-of-the-art solution for all on-board power applications demanding an isolated and regulated output voltage. Models Ordercode TES 3-1210 TES 3-1211 TES 3-1212 TES 3-1222 TES 3-1223 TES 3-2410 TES 3-2411 TES 3-2412 TES 3-2422 TES 3-2423 TES 3-4810 TES 3-4811 TES 3-4812 TES 3-4822 TES 3-4823 Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC Output current max. 700 mA 600 mA 250 mA 125 mA 100 mA 700 mA 600 mA 250 mA 125 mA 100 mA 700 mA 600 mA 250 mA 125 mA 100 mA Efficiency typ. 75 79 82 81 81 76 80 83 82 82 76 80 83 82 82 % % % % % % % % % % % % % % % 9 - 18 VDC 18 - 36 VDC 36 - 75 VDC www.tracopower.com Page 1 DC/DC Converter TES 3 Series 3 Watt Input Specifications Input current no load /full load 12 Vin models 24 Vin models 48 Vin models 12 Vin models 24 Vin models 48 Vin models 12 Vin models 24 Vin models 48 Vin models 20 mA / 300 mA typ. 5 mA / 150 mA typ. 3 mA / 75 mA typ. 6 VDC / 8 VDC typ. 12 VDC / 16 VDC typ. 24 VDC / 32 VDC typ 25 V max. 50 V max. 100 V max. 0.5 A max. Can be reduced by ext. 1-2.2 F polyester film capacitor Pi filter Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Reflected input ripple current Input filter Output Specifications Voltage set accuracy Regulation - Input variation Vin min. to Vin max. - Load variation 10 - 100 % - single output models - dual output models balanced load - dual output models unbalanced load Ripple and noise Temperature coefficient Current limitation Short circuit protection Capacitive load - single output models - dual output models 1% 0.3 % max. 1.0 % max. 1.0 % max. 2.0 % max. 50 mVpk-pk max. 0.02 % / C > 110% of Iout max., foldback Hiccup mode, indefinite (no automatic recovery) 470 F 180 F General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... +75 C + 100 C max. - 40 C ... +125 C 95 % rel H max. >1`000`000 h @ 25 C 1`500 VDC 65 pF typ. >1`000 Mohm 300 kHz typ. (Frequency modulation PFM) UL 1950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage (SELV limit) UL/cUL File E188913 Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Switching frequency Safety standards Input/Output Input/Output Input/Output Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TES 3 Series 3 Watt Physical Specifications Case material Package weight Reflow soldering profile non conductive black plastic (flammability to UL 94-V0) 10 g (0.35 oz) Peak temp. 230C (10 sec max.) 185C for 90 sec max. Convection reflow solder process is recommended Outline Dimensions mm (inches) 32.3 (1.272) Seating Plane Detail A S 10.2 (0.402) 0.5 (0.02) 14.8 (0.583) 16.1 (0.634) 18.8 (0.740) 24 13 Top View 1 2.16 2.54 (0.1) 12 17.78 (0.7) Pin-Out 1.0 (0.04) Pin 1 2 Single -Vin (GND) -Vin (GND) NC NC NC NC +V Output NC -V Output NC +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) NC Common NC -V Output + V Output NC Common NC +Vin (Vcc) +Vin (Vcc) (0.085) Detail A M10:1 0 0. 4) 3 10 11 12 13 0.15 1. 0 ( 0.15 (0.006) 14 15 22 23 24 1.3 (0.051) Specifications can be changed without notice www.tracopower.com Page 3 DC/DC Converter TES 3 Series 3 Watt Solder Pad Dimensions mm (inches) 27.94 (1.1) (0.085) 2.16 2.54 2.54 (0.1) (0.1) 17.78 (0.7) 2.54 2.54 (0.1) (0.1) 20.0 (0.787) 1 (0.059 Min.) 1.5 Min. Specifications can be changed without notice Rev. 10/01 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch * internet: http://www.tracopower.com 2.8 (0.11) Page 4 |
Price & Availability of TES3-1212
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |